PLD1211型精密露點儀
一、主要特點
零點自動校準
獨有的超大儲存功能
首創的電量顯示
操作簡單、攜帶方便
重復性好、響應速度快
全量程單點法露點校準
斜率自動校準
獨特的大屏顯示
先進的探頭保護功能
抗污染、抗干擾
靈敏度高、穩定性好
二、技術指標
測量范圍：露點-80～+20℃，（支持ppmv等）
露點精度：±0.2℃（當露點溫度低于0℃，傳感器輸出為霜點） 響應時間63％[90％]
+60→-20℃ 5s[45s] -20→-60℃ 10s[240s]
分 辨 率：露點0.1℃或0.1ppm 重 復 性：±0.2℃
氣體流量：SF6調節在0.5～0.9L/min，H2調節在0.1～0.4L/min
壓力測量：0～1.0MPa 探頭保護：不銹鋼燒結過濾網
工作電壓： 110～220VAC，交直流兩用
儲存溫度等級：-40～+70℃
輸出接口： USB1.1規范
操作環境：
溫 度 ： -35～+60℃
壓 力 ： 0～20bar
樣氣流速： 無影響 其它配置： 標準版管理軟件，含報表打印，濕度常用轉換工具包 電子質量流量計 鋰電池，交直流電兩用，自動切換，過充過放保護功能
PLD1211 Precision dewpoint meter
First, the main features of
Automatic zero calibration
The unique oversized storage function
First power display
Easy to operate, easy to carry
Repeatability, fast response
Full-scale single-point method Dew Point calibration
Slope automatic calibration
Unique large-screen display
Advanced probe protection
Anti-pollution, anti-jamming
High sensitivity, good stability
Second, technical indicators
Measuring range: dew point of -80 ~ +20 ℃, (support ppmv)
Dew Point accuracy: ± 0.2 ℃ (when the dew point temperature is below 0 ° C, the sensor output frost point) Response time 63% [90%]
+60 → -20 ℃ 5s [45s] -20 → -60 ℃ 10s [240s]
Resolution: 0.1 ℃ dew point or 0.1ppm Repeatability: ± 0.2 ℃
Gas flow rate: SF6 adjusted within 0.5 ~ 0.9L/min, H2 adjusted within 0.1 ~ 0.4L/min
Pressure measurement: 0 ~ 1.0MPa probe protection: stainless steel sintered filter
Operating voltage: 110 ~ 220VAC, AC and DC
Storage Temperature rating: -40 ~ +70 ℃
Output Interface: USB1.1 specification
Operating environment:
Temperature: -35 ~ +60 ℃
Pressure: 0 ~ 20bar
Sample gas flow rate: no effect on other configurations: the standard version of the management software, with report printing, humidity commonly used conversion kit electronic mass flowmeter lithium battery, AC and DC dual-use, automatic switching, overcharge and over discharge protection function |
